OVERCOMING COMMON INSTALLATION CHALLENGES WITH BABY GATES
CRUCIAL INSTALLATION DISCLAIMER
Proper installation of baby gates requires a degree of expertise. Attempting this task without the help of a professional can lead to potential hazards and unexpected expenses.
By reading this article, you acknowledge that you have reviewed and accepted the terms and conditions specified here: Website Terms & Conditions.
The scenarios outlined below demonstrate various challenges I have encountered during installations, which may reflect your own experiences and offer valuable solutions.
INSTALLATION ISSUE 1: UNEVEN SURFACES
ADDRESSING UNEVEN SURFACES IN INSTALLATIONS
-
- Measure the widest point at the top to determine the necessary size for the gate and any needed extensions. (CLICK HERE FOR MEASURING GUIDELINES).
- Once you have the gates/extensions, use an angle grinder with a metal/aluminium disc to cut the gate accurately, adhering to the measurements indicated in the reference images above.
- Remove the plastic component from the section you intend to cut away and insert it into the cut part of the gate to ensure proper fitting of the tension knob.
- This process will be clearer once you have the gate in hand.
INSTALLATION ISSUE 2: MOUNTING ON A SKEW WALL
RESOLVING THE CHALLENGE OF MOUNTING ON A SKEW WALL
-
- Ensure that the gate/extensions are prepared for installation.
- Use Pratley Putty Quickset to fill any gaps and create a level surface on the wall.
- Allow the Putty to cure completely BEFORE tightening the tension knobs to firmly attach the gate using pressure.
- Do not rely on the gate for safety until all procedures are fully completed and the gate has been tested for stability.
INSTALLATION ISSUE 3: INSTALLING BABY GATES OUTDOORS
CONFRONTING THE CHALLENGE OF OUTDOOR BABY GATE INSTALLATION
While installing baby gates outdoors can offer a quick and budget-friendly solution, it may also void the warranty of these gates.
I recommend that outdoor installations of baby gates be viewed only as a temporary and cost-effective approach. This may risk voiding your warranty on the gates.
-
- Baby gates are specifically designed for indoor use and are unsuitable for outdoor installation due to potential exposure to adverse weather conditions.
- This limitation is clearly stated in the warranty documentation that accompanies the product.
- Failure to comply with warranty stipulations will lead to the loss of warranty coverage.
For a durable solution, consider hiring a contractor who specialises in security or latch gates. Although this may incur higher costs, it is the most reliable option.
PREPARING THE BABY GATE AND EXTENSIONS FOR OUTDOOR USE:
Disclaimer: None of these measures guarantee complete rust protection; however, they aim to extend the lifespan of the gate in South African climatic conditions.
Regular maintenance every 1-2 months can significantly reduce the risk of rust.
To minimise rust and moisture accumulation, adhere to these guidelines:
-
- Before installation, treat the baby gate, extensions, and mounting kit, ensuring to cover all surface areas at the base as well.
- Drill holes at the bottom of the gate using an 8mm steel drill bit. This will enable water drainage and prevent rust from developing inside the hollow gate, where moisture may collect at joints, connectors, and tension knobs. The holes will provide ventilation to avert moisture build-up.
- Apply a light coat of Rustoleum Painters Touch 2X Ultra Cover – Satin Clear 340g, available at takealot.com, to the baby gate, extensions, and mounting kit.
- Allow to dry completely (approximately 2 hours), then apply a second coat.
For existing rust:
-
- Spray the affected areas with Rust-Oleum Rust Reformer 291g, following the product guidelines.
- Refer to the product description on takealot.com; you may need to obtain mineral spirits to clean any overspray on non-rusted areas.
- The rust reformer will transform rust into a black colour, which should then be coated with Rust-Oleum Stops Rust Enamel Gloss White 340g, available on takealot.com.
The post Baby Gate Challenges and Hacks appeared first on Baby Proof SA.
The Article Baby Gate Hacks to Overcome Common Challenges Was Found On https://limitsofstrategy.com
The Article Baby Gate Hacks for Easy Solutions to Common Issues found first on https://electroquench.com
Post navigation
Previous Post
House Cleaning Tips for a Sparkling Home in Yeovil